Home » Publications
Category Archives: Publications
The concentration of rare earth elements in pristine zircons is strongly correlated to hydrogen, highlighting their role in the incorporation of hydrogen.
Nominally anhydrous minerals (NAMs) is the name given to minerals without water in their structural formulae. The concentration of H2O in these minerals can nevertheless be substantial, up to several thousand ppm, and has huge implications for the water storage capacity of magmas and the mantle.
A new study by De Hoog et al. sheds light on how hydrogen is incorporated into the structure of one such NAM: zircon. By conducting Secondary Ion Mass Spectrometry (SIMS) on a population of young (<14 Ma) pristine zircons, the authors were able to measure the abundance of H2O at various points in individual crystals. They found that the concentration of H2O was strongly correlated with the content of P and rare earth elements (REE), and concluded that hydrogen is incorporated by a charge-balance mechanism whereby H+ and REE3+ substitute for Zr4+ in the mineral lattice.
De Hoog JCM, Lissenberg CJ, Brooker RA, Hinton R, Trail D, & Hellebrand E (2014). Hydrogen incorporation and charge balance in natural zircon. Geochimica et Cosmochimica Acta, 141, 472-486.. http://dx.doi.org/10.1016/j.gca.2014.06.033
The Rum layered intrusion testifies to modification by injection of hot magma and remobilization of pre-existing cumulate rocks.
The Isle of Rum in the Inner Herbrides of Scotland is a classic and much-studied example of an igneous layered intrusion. Dated at 60 Ma, it’s emplacement was related to the development of the proto-Icelandic plume.
New work by Leuthold et al. focusses on a particular layer within the intrusion, ‘Unit 9’, which shows a progression from peridotite (olivine-rich) through troctolite (olivine + plagioclase) to gabbro (plagioclase + clinopyroxene).
By integrating field and geochemical observations, this study challenges the idea that Unit 9 was formed through progressive fractional crystallization of a single parental liquid. Instead, the authors hypothesise that multiple generations of rimmed clinopyroxenes with sharp boundaries in Cr2O3 and REE indicate that Unit 9 underwent two separate episodes of partial melting in response to the intrusion of hot picritic magma.
This upward and lateral migration of melts and the reactive remobilisation of a cumulate pile may be an important process in all layered intrusions and open magma chambers.
Leuthold J, Blundy JD, Holness MB, & Sides R (2014) ‘Successive episodes of reactive liquid flow through a layered intrusion (Unit 9, Rum Eastern Layered Intrusion, Scotland)’. Contributions to Mineralogy and Petrology, 168(1), 1-27. http://dx.doi.org/10.1007/s00410-014-1021-7
More precise data is required to determine whether a novel experimental technique designed to control experimental fO2 is effective under H2O-undersaturated conditions.
Piston cylinder experiments typically employ noble metals as sample containers due to their low reactivity and high melting temperature. Many years of experimental research has demonstrated that choice of capsule metal often involves a payoff between melting temperature and the ability to control important compositional parameters (e.g., loss of Fe and H2O).
Oxygen fugacity (ƒO2) is intrinsically linked to these variables and is a key property of an experiment because it controls the valence of multivalent elements. In turn, this alters phase relations and mineral compositions, and affects speciation of other volatiles elements such as sulphur.
Earlier work by Jakobsson (2012) presented a novel experimental technique for controlling ƒO2 by physically separating a redox buffer from an Au-Pd alloy inner capsule with a hydrogen-permeable barrier. This technique relies on hydrogen fugacity being equal in both in the outer and inner capsule as fixed by the solid buffer; however, the original study failed to take into account the H2O-undersaturated nature of the experimental melts, which actually act to reduce the ƒO2 imposed on the inner capsule.
This amendment acknowledges this oversight, and corrects the measured ƒO2 in the original study for H2O-undersaturation. The authors conclude that whilst this sample assembly is capable of controlling fO2 in H2O-saturated runs, more precise analysis of other parameters (such as the activity of Fe and H2O in the melt) are needed to assess whether the same holds true for H2O-undersaturated variants.
Jakobsson, S., Blundy, J., & Moore, G. (2014). Oxygen fugacity control in piston-cylinder experiments: a re-evaluation. Contributions to Mineralogy and Petrology, 167(6), 1-4. http://dx.doi.org/10.1007/s00410-014-1007-5
A texturally diverse suite of cumulates beneath Grenada, Lesser Antilles, are produced at shallow depths and show marked differences from comparable rocks in the same volcanic arc
Primitive melts produced beneath island arc volcanoes are rarely erupted at the surface in their original form, instead charting a huge variety of evolved compositions and testifying to the influence of intracrustal processing during magmatic ascent. The study of cumulates (coarse-grained igneous rocks) that sample directly from magma storage regions offers a chance to glimpse a ‘snapshot’ of this magmatic evolution.
A new CRITMAG-funded study by Stamper and co-workers combines major element analysis of mineral compositions in plutonic xenoliths and volcanic rocks with data from previous experimental studies. The data is used to explore the differentiation of mantle-derived magmas beneath volcanic island of Grenada, Lesser Antilles.
They find that observed diversity in cumulate assemblage and texture is caused by variability in parental melt composition and post-cumulus interaction with hydrous evolved melts. The whole plutonic suite is produced in a narrow pressure window (P = 0.2 – 0.5 GPa) at ∼ 850 – 1050◦C, tracing a shallow (depth ≤15km) section of a vertically extensive volcanic system. Major element barometers and experimental phase relations indicate that the source magma underwent equilibration with a garnet lherzolite source at depth of ≥55 km.
Grenada cumulates are notably different from those found on the neighbouring island of St Vincent, which lies only 120 km to the north. At Grenada, lower magmatic H2O contents are manifest are in plagioclase-rich cumulates and aluminous spinels. The contrast in assemblages and mineral chemistry of cumulate xenoliths from the two islands demonstrate the effect of small scale changes in melt composition and magma storage conditions.
Stamper CC, Blundy JD, Arculus RJ, & Melekhova E. (2014) ‘Petrology of Plutonic Xenoliths and Volcanic Rocks from Grenada, Lesser Antilles’. Journal of Petrology, 55(7), 1353-1387. http://dx.doi.org/10.1093/petrology/egu027
A new study shows that substitution of aluminium for silicon in clinopyroxene tetrahedra increases during cooling. The resulting local charge balance favours REE incorporation into the crystal lattice.
A new study by Scarlato and co-workers shines the spotlight on clinopyroxenes in a trachybasaltic dyke in the Valle del Bove depression on Mt Etna, Italy. Previous studies by Mollo et al. were able to quantify how the the cooling rate of the crystals increased from 0.02ºC/min to 1.13ºC/min from the core to rim of the dyke. The fact that the solidification path in this igneous feature was already well-constrained provided a perfect platform for this study, which explores the effect of temperature variations on the partitioning of rare earth elements (REE) between clinopyroxene and melt.
The structure of the clinopyroxene mineral consists of interlocking silicon tetrahedra, and two sites where metal cations can be incorporated (called M1 and M2). The study found that a higher cooling rate favours the substitution of tetrahedral aluminium (AlIV) for silicon. AlIV acts as a local charge balance for REE ions; as a consequence, REE are more easily accommodated into the M2 site of the mineral lattice.
Scarlato et al.’s measurements from this natural laboratory match the theoretical predictions of REE behaviour made using the ‘lattice strain model’ of Blundy & Wood (1994). This demonstrates that the REE partitioning between melt and clinopyroxene in naturally cooled magmas is controlled by local charge balance and cation substitutions, rather than kinetic parameters or diffusion.
Scarlato P, Mollo S, Blundy JD, Iezzi G, & Tiepolo M (2014) ‘The role of natural solidification paths on REE partitioning between clinopyroxene and melt’ Bulletin of Volcanology, 76(3), 1-4. http://dx.doi.org/10.1007/s00445-014-0810-1
High temperature experiments reveal previous eruptions were characterized by shallow magma storage, a scenario incompatible with the depth of the current anomaly
Cerru Uturuncu, Bolivia, is a continental arc volcano located in the Central Andes. Recent satellite observations of ground deformation in the area have measured uplift of 1 – 2cm per year. This has been accompanied by persistent seismic activity and indications are strong that Uturuncu may be entering a period of unrest and possible magma build up. Inverse modelling of the deformation has indicated a large diameter anomaly at 11 – 17km beneath the volcano.
A new study by Muir and co-workers at the University of Bristol conducted high temperature experiments on the two types of lava primarily from the volcano: rhyolite and dacite. The aim of their work to determine if previous episodes of magma storage are consistent with the depth of the anomaly causing the current deformation, and whether future eruptions would likely be effusive (in continuation of past activity at Uturuncu) or larger-scale explosive events.
The natural mineral assemblages in both types of lava were replicated by experiments at 870ºC at pressures equivalent to 2 – 6 km depth, a similar crustal level to the location of recent earthquakes recorded at the volcano. This experimental evidence precludes the role of dacites and rhyolites in producing the observed anomaly beneath Uturuncu. Instead, the authors propose a model where dacitic magmas are formed from fractional crystallisation in an underlying, deeper magma body before stalling in the shallow crust prior to their effusive eruption.
Muir DD, Blundy JD, Rust AC, & Hickey J (2014) ‘Experimental constraints on dacite pre-eruptive magma storage conditions beneath Uturuncu volcano’. Journal of Petrology, 55(4), 749-767. http://dx.doi.org/10.1093/petrology/egu005
High pressure experiments on a high-Mg basalt indicate parental magmas beneath Grenada are oxidised, and resolve the origin of two distinct lavas series
Experimental petrologists at the University of Bristol conducted experiments on lavas from Grenada using a range of experimental apparata to simulate to pressures and temperatures found beneath the island arc volcano. The redox conditions of the experimental runs were measured using the Diamond Light Source synchrotron, UK, and spanned a wide range of oxygen fugacities. Synthetic replicas of natural rocks produced at moderately oxidising conditions were found to be comparable to the most primitive lavas erupted on Grenada.
Stamper and co-workers were able to use the composition of olivine crystals produced in experiments to calibrate a novel oxybarometer, which uses the partitioning of Fe and Mg between liquid and crystals to measure the oxygen fugacity of an olivine-bearing basalt.
Experiments from this study also resolve the origin of the geochemically and petrographically distinct M- and C-series lavas, the latter type being unique to Grenada. At high pressures, experimental liquids are able to track the geochemical evolution of the highly magnesian M-series. In contrast, at lower pressures, clinopyroxene saturation is displaced to lower temperatures, relative to olivine, and so residual melts generated at these conditions become enriched in calcium, replicating the characteristic feature of the C-series.
Stamper CC, Melekhova E, Blundy JD, Arculus, RJ, Humphreys, MCS & Brooker, RA (2014) ‘Oxidised phase relations of a primitive basalt from Grenada, Lesser Antilles’, Contibutions to Mineralogy and Petrology, 167:954. http://dx.doi.org/10.1007/s00410-013-0954-6
Numerical modelling shows that magma buoyancy is the most important factor in determining the frequency and magnitude of the Earth’s most destructive volcanic phenomena
A new paper by a collaboration from the Universities of Geneva, Bristol and Savoie quantifies the relative contributions of magma supply, mechanical properties of the crust and magma, and tectonic regime in controlling the frequency and magnitude of volcanic eruptions. The team, led by Professor Luca Caricchi, coupled over 1.2 million simulations of a thermomechanical numerical model of magma injection into Earth’s crust with complex statistical analysis to try and replicate the behaviour of melt beneath a volcano.
This work reveals a dichotomy in the causes of volcanic eruptions, which is related to their size. It is known that small, frequent eruptions are triggered by magma replenishment, which imparts stress on the magma chamber walls; eruptions occur when this stress exceeds the strength of the surrounding rock. In contrast, Caricchi et al. demonstrate that bigger, less frequent eruptions are instead driven by the intrinsic buoyancy associated with large magma bodies, a consequence of the slow accumulation of low-density magma beneath a volcano.
These findings are particularly important because this is the first time a physical link between the frequency and magnitude of volcanic eruptions has been established. The findings allow the predictions of the scale of the largest possible volcanic eruption on Earth; the work suggests magma chamber can contain a maximum of 35,000 km3 of eruptible magma, translating to an eruption spewing out approximately 3,500 km3 of rock. This is three times the volume released during the supereruption of Yellowstone around 640,000 years ago.
Caricchi, L, Annen, CJ, Blundy, JD, Simpson, G & Pinel, V (2014) ‘Frequency and magnitude of volcanic eruptions controlled by magma injection and buoyancy’, Nature Geoscience. http://dx.doi.org/10.1038/ngeo2041.
High resolution imaging of crystal zoning reveals events occurring in the months and days before an eruptions
Development of new techniques enables quantification of major and trace element zoning in lava phenocysts to nanometre scale
Whilst the long-term evolution of a magmatic system may occur over many thousands of years, changes immediately preceding volcanic eruptions may occur on the timescale of months, days and minutes. This kind of resolution is not obtainable using classical radiometric dating, being is constrained by the half-lives of elements. Within the last decade, petrologists have increasingly turned to the technique of diffusion chronometry; here, the blurring in chemical zoning within lava phenocrysts is used to estimate the duration between the last perturbation of the magmatic system and the eruption. The better the resolution of the electron microscope image, the smaller the timescale that can be calculated from a crystal.
Saunders and co-workers interrogated plagioclase and orthopyroxene crystals from the 1980 eruption of Mt St Helens using the FEG-EPMA at the University of Bristol, a high-resolution electron microprobe purchased as part of the CRITMAG grant. The FEG-EPMA has a beam size of ~ 30 nm, two orders of magnitude smaller than is common in conventional microprobe analysis. This allows collection of both detailed back scattered electron (BSE) images and major element composition. The latter has a quantitative resolution of 750 nm (0.00075 mm), making FEG-EPMA ideally suited for application to diffusion chronometry. The authors also look at two other methods of microanalysis, NanoSIMS and TOF-SIMS, which cannot image samples but have the advantage of being able to measure a large range of major and trace elements at ≥50 nm resolution.
Using one, or a combination of the three techniques described in the paper, the authors demonstrate is it possible to obtain chemical profiles of zoned minerals with nanoscale precision. Such detail facilitates characterisation of events that occurred in the months and days before historic eruptions.
Saunders K, Buse B, Kilburn MR, Kearns S, & Blundy J (2014) ‘Nanoscale characterisation of crystal zoning’, Chemical Geology, 364, 20-32. http://dx.doi.org/10.1016/j.chemgeo.2013.11.019
A new calibration for micro-Raman spectroscopy paves the way for easy and accurate quantification of CO2 dissolved in volcanic glasses
CO2 is an important volcanic volatile. It is commonly the second most abundant dissolved gaseous species in a molten rock (after H2O) and it can have a dramatic effect on the phase relations and rheology of degassing magmas. The release of CO2 dissolved in magmas is also a vital part of the global carbon cycle. Thus, there has been considerable experimental effort dedicated to measuring CO2 solubility in silicate melts.
Raman spectroscopy is a non-destructive spectroscopic technique that harnesses the scattering of light to provide information about the molecular structure of sample, e.g., CO2 content. Micro-Raman has advantages over other comparable techniques because it can analyse <10 μm spot sizes and it requires relatively minimal sample preparation; however, the analysis requires a compositionally dependent calibration.
To this end, Morizet and co-authors present a new calibration for the quantification of CO2 in geologically relevant glass compositions by micro-Raman. The study collected micro-Raman CO2 data for an extensive database of synthetic and natural samples, whose CO2 content had previously been quantified by bulk analysis, and found a relationship between the spectral features in the high-frequency region of aluminosilicate glasses and the spectral peak associated with dissolved carbonate. This new calibration is found to be accurate to better than ±0.4 wt% CO2.
Morizet Y, Brooker RA, Iacono-Marziano G, & Kjarsgaard BA (2013) Quantification of dissolved CO2 in silicate glasses using micro-Raman spectroscopy. American Mineralogist, 98(10), http://dx.doi.org/10.2138/am.2013.4516